Latest activity
-
Another long term project nearing the end, reassembly usually takes a couple of weekends but this is now in week five. The kit is so... -
Dog Star reacted to adrian's post in the thread 7mm Scruft's Junction - folding table... down the garden path... Painting the engine shed! with
Like.
I use an MDF sanding sealer before painting. I guess it is the same as any sanding sealer or varnish. -
adrian replied to the thread 7mm Scruft's Junction - folding table... down the garden path... Painting the engine shed!.I use an MDF sanding sealer before painting. I guess it is the same as any sanding sealer or varnish. -
Dog Star reacted to 40057's post in the thread 7mm Scruft's Junction - folding table... down the garden path... Painting the engine shed! with Like.
That sounds like good advice! I have had difficulties getting a good finish on LCUT brickwork. I’ve been using LCUT brick-effect MDF...
-
Rob Pulham reacted to Spike's post in the thread 7mm Scruft's Junction - folding table... down the garden path... Painting the engine shed! with Like.
The engine shed has been the area of focus over the past month. After applying primer to the shed ran into a challenge when applying the... -
david bigcheeseplant replied to the thread RAILEX 2026 (Aylesbury) 23rd May & 24th May.Just a heads up RAILEX is this weekend David -
Laurie of LG Miniatures has informed me that the coupling rods are back in stock, and are on their way to me. :) I'm looking forward to...
-
Another long term project nearing the end, reassembly usually takes a couple of weekends but this is now in week five. The kit is so...
-
Rob Pulham reacted to Mikemill's post in the thread Metropolitan Railway Electric Locomotive with Like.
The Metro Vic in a more realistic setting Mike
-
Rob Pulham reacted to Mikemill's post in the thread Metropolitan Railway Electric Locomotive with Like.
The loco is complete, as there are two motors one for each bogie I have used a lead acid battery for extra power, the battery is located...
-
Rob Pulham replied to the thread For those in need of Reasonably Priced Blowlamp but don't like the idea of a cheap plastic fitting on top of a camping gas cylinder....My Iroda Solder Pro (which I use for modelling) does get very hot and would probably silver solder, it just didn't give off enough...
-
Rob Pulham reacted to simond's post in the thread For those in need of Reasonably Priced Blowlamp but don't like the idea of a cheap plastic fitting on top of a camping gas cylinder... with Like.
I’ve got a decent propane torch for heavy duty use, but for 0 gauge, my chef‘s torch will silver solder just fine.
-
Thanks to Dave's timely reply, my life was made so much easier when he said that the smaller pipe didn't actually feed into the down... -
Rob Pulham replied to the thread 7mm MOK 8F - 8425.Thanks to Dave's timely reply, my life was made so much easier when he said that the smaller pipe didn't actually feed into the down...
-
-
Rob Pulham posted the thread For those in need of Reasonably Priced Blowlamp but don't like the idea of a cheap plastic fitting on top of a camping gas cylinder... in Talk.I have never ventured into buying a gas powered blow lamp because my father nearly burned the house down when I was in my early teens...
-
